I do have options for you but I think there may be some confusion on how to activate the brakes on a towed vehicle. The Tekonsha PowerTrac Electronic Brake Controller part # 39523 or one like it is designed to activate electric brakes on a trailer, not hydraulic brakes on a towed vehicle. In order to activate hydraulic brakes on a towed vehicle you will need a much more complex system, the Roadmaster InvisiBrake Supplemental Braking System part # RM-8700 is the most economical option we... view full answer...
To brake a towed vehicle like your S10 you'd need to use a supplemental braking kit as a brake controller for trailer brakes will not activate vehicle brakes. For that we have the Blue Ox Patriot # BLU37TR which installs in the truck floor boards and presses on the brakes of the truck. view full answer...
Since there are no custom fit hitches for the 1977 Chevy P Series trucks you will need to use a heavy duty weld-on truck hitch such as # 41990-07. I have included a link to the options for you. Welding should be done by a qualified professional welder. These hitches have the tongue weight capacity for the generator and propane tanks.
You could then use a carrier such as # 63153 rated for 500 pounds. I have included a link to a video review of this carrier for you. view full answer...
The correct steering stabilizer for your 1996 built on a Chevy P30 chassis is the part # RM-RBK3-RSSP30 and this does replace the current stabilizer you have now. You only need one of these though even though your current setup uses two shocks. view full answer...
Do you have a Kwikee set on there currently that you need a replacement for? If so, if you could get me any part numbers off of the assembly that you can find I'd have an easier time determining what you'd need. view full answer...
We do have a steering stabilizer that is confirmed as a fit for your 1992 Southwind on a Chevy P-30 Chassis. For that you would want the part # RM-RBK3-RSSP30 that is a confirmed fit. view full answer...
I attached an install diagram for the Air Lift kit part # AL88203 that fits your 1989 P30 step van and in it you can see it does not attach to the leaf spring and instead to the axle and the jounce bumper mount. view full answer...
The good news is that the P30 and P32 1996 P Series motorhome chassis front sway bar fits are the exact same so either way the part # RM-1109-116 would be what you would need. We don't have any steering stabilizer fits though but the front bar will make a big difference. view full answer...
For the 1-1/4 inch factory front anti-sway bar on the 1995 Chevy P30 chassis you can use Roadmaster Polyurethane Bushing Kit # RM-4109-109.
If you wanted to replace the factory front sway bar with a beefier, more effective model you can use # RM-1109-116. Please note: Product RM-1109-116 intended for vehicles with coil spring independent suspension; does not work for widebody models. view full answer...
Yes, we have exactly what you need. For an air spring suspension enhancement system for your 1993 Winnebago based off of a Chevy P30 chassis you would want the Air Lift LoadLifter 5000 Air Helper Springs # AL57203. view full answer...
If you have a P30 chassis RV made in 1986 then the correct steering stabilizer is the Roadmaster part # RM-RBK3-RSSP30 that you referenced. view full answer...
I believe you have 8xR19.5 tires on your 1993 Itasca Motorhome as this is a rather common tire size for motorhomes. If this is the case then I recommend using the Pewag All Square Snow Tire Chains with Cam Tighteners part # PWE2214SC. These chains have square links which will provide excellent traction in both snow/ice, a reversible pattern so you can obtain the most life out of them, and cam tensioners which makes installation much simpler.
If you do not have 8xR19.5 tires then please... view full answer...
We do have a solution though there isn't an exact replacement module for a 9513 unit manufactured before 1999.
Instead, what you'll need to do is upgrade your steps with the Motor Upgrade Kit for Kwikee Electric RV Steps # LC379145.
This will give you a new - and better performing - motor, linkage, control unit, switch kit, and hardware. I have added links to a couple video reviews I recommend checking out as well. view full answer...
We have 2 ladder standoffs with square bases, the Replacement Stand-Off Brace for Surco Universal Exterior RV Ladders # SPN-416, and the Replacement Ladder Support Peg for Stromberg Carlson RV Exterior Ladder # 8535 you referenced.
They both have the same dimensions, which you can see from the attached photo. They have overall length of about 5 inches, so the ladder would about 5 inches away from the back of the RV not 6 inches like you measured. To get the 6 inches you need, you could... view full answer...
I do have a solution for you, but it will not involve a custom fit trailer hitch. The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide. part # 13703, is an adjustable universal hitch. It can fit frames from 22" to 72" in width. It comes with all the hardware you need to bolt it to your vehicle's frame, which requires drilling. It can also be welded to your frame. It has a maximum gross trailer weight of 3,500 lbs.
I have included a product description link and a video... view full answer...
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".
To pick the correct cover, you will also need to know the type of hinge you need.
There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on... view full answer...
For your 1986 Chevy P Series Pinnacle we have the Clear Plus Wipers part # CP11161 listed as a fit and they are priced great too as well as the # CP80161 that you referenced.
The # CP80161 is more geared for snow and ice whereas the part # CP11161 is more for rain. view full answer...
We do have a large selection of trailer lights available that may work well on your 1984 Holiday Rambler RV.
The closest options we have available to the 20-3/4 inch measurement that you provided is a triple tail light like the Bargman # 47-84-103. This is a 3-light fixture that features 2 red LED tail lights and 1 incandescent reverse light. The red LED lights function as a combination brake, tail and turn signal light. The overall dimensions, taken from outside to outside, are 18 inches... view full answer...
I have an alternate solution for you, but we do not have an electric leveling system for your motorhome. The best solution we have would be to use the Camco FasTen RV Leveling Blocks # CAM44512 that you can drive on. Then you can use the Ultra-Fab Ultra Scissor Jacks # UF48-979031 to keep the motorhome stable when walking around.
The Ultra-Fab Ultra Scissor Jacks # UF48-979031 will bolt to the frame of your motorhome and keep it stable. Keep in mind they are not designed to lift the motorhome,... view full answer...
Go To Results